For years there seemed to be just one single reputable path to keep data on a personal computer – having a disk drive (HDD). Then again, this type of technology is already showing it’s age – hard drives are really noisy and sluggish; they are power–ravenous and are likely to produce lots of warmth during serious operations.

SSD drives, on the contrary, are really fast, use up far less power and are also much cooler. They offer a new method of file accessibility and storage and are years in front of HDDs with regards to file read/write speed, I/O performance and also energy effectivity. See how HDDs stand up against the newer SSD drives.

1. Access Time

Image

A result of a revolutionary new method to disk drive general performance, SSD drives make it possible for considerably quicker data access speeds. With an SSD, data file accessibility times tend to be lower (as little as 0.1 millisecond).

Image

HDD drives make use of spinning disks for data storage purposes. Each time a file will be accessed, you have to await the right disk to get to the correct position for the laser beam to reach the file in question. This translates into a typical access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Thanks to the very same radical solution enabling for faster access times, it is possible to benefit from far better I/O efficiency with SSD drives. They’re able to accomplish double as many operations during a given time as compared with an HDD drive.

An SSD can handle at the least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance steadily raises the more you employ the drive. Nonetheless, just after it reaches a specific limit, it can’t go quicker. And because of the now–old technology, that I/O limit is a lot less than what you could receive having an SSD.

HDD are only able to go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives are lacking just about any rotating elements, which means there is a lot less machinery included. And the less literally moving elements you will discover, the lower the chances of failing can be.

The typical rate of failing of an SSD drive is 0.5%.

Image

HDD drives make use of rotating disks for storing and reading data – a technology going back to the 1950s. And with disks magnetically hanging in the air, rotating at 7200 rpm, the possibilities of something failing are considerably bigger.

The average rate of failing of HDD drives can vary amongst 2% and 5%.

4. Energy Conservation

Image

SSD drives are usually smaller than HDD drives and they don’t possess virtually any moving parts whatsoever. It means that they don’t produce as much heat and need considerably less energy to function and much less energy for cooling down reasons.

SSDs consume somewhere between 2 and 5 watts.

Image

HDD drives can be well known for becoming noisy; they can be prone to overheating and in case you have several hard drives in a single web server, you will need one more a / c device simply for them.

In general, HDDs use up somewhere between 6 and 15 watts.

5. CPU Power

Image

The speedier the file accessibility rate is, the faster the data file calls will likely be treated. Because of this the CPU won’t have to arrange assets expecting the SSD to reply back.

The regular I/O wait for SSD drives is just 1%.

Image

When you use an HDD, you must spend additional time waiting for the outcome of one’s data call. As a result the CPU will remain idle for extra time, waiting around for the HDD to react.

The average I/O wait for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

The bulk of our completely new machines now use only SSD drives. Our personal tests have shown that with an SSD, the normal service time for an I/O request whilst operating a backup remains below 20 ms.

Image

Sticking with the same server, however this time equipped with HDDs, the effects were totally different. The standard service time for any I/O call changed somewhere between 400 and 500 ms.

7. Backup Rates

Image

You can easily notice the real–world potential benefits to having SSD drives each and every day. For instance, with a hosting server pre–loaded with SSD drives, a full back–up will take merely 6 hours.

Image

We made use of HDDs exclusively for lots of years and we have got very good knowledge of precisely how an HDD runs. Generating a backup for a web server designed with HDD drives is going to take about 20 to 24 hours.

With Web Hosting World, you may get SSD–equipped website hosting services at cost–effective price points. Our shared hosting plans plus our Linux VPS feature SSD drives by default. Get an hosting account along with us and experience how your sites will become better automatically.

  • Service guarantees

  •  
  • Sign up today. There won’t be any configuration fees you’ll also find total root and SSH access to your server. 99.9% network uptime is guaranteed.

  • Compare our prices

  •  
  • Quickly examine the allocations and features offered by all of our Virtual Private Servers. Find exactly which VPS configuration will provide you with just what you’ll need to handle your dynamic online presence easily.
  • Compare our hosting plans

  • Contact Us

  •  
  • Get in touch with us 24/7/365 by email or by using Web Hosting World’s really–fast ticketing platform. Our techs are going to reply to your queries within just 1 hour.